IMG_9235

2 AXIS TRACKER

The 2-axis tracker is the patriarch of our product range. Its long history dates back in 2005, since then, more than 17.000 have been installed worldwide.

ADAPTABLE AND FLEXIBLE SOLUTION

The design of the H frame support structure provides the MECASOLAR tracker with substantial flexibility regarding the installation of modules compared to other manufacturers. The system can host up to 16 kWp*.

OVER 35% INCREASE IN PRODUCTIVITY

MECASOLAR’s tracking system can increase photovoltaic solar energy production by more than 35%, when compared to a fixed installation. This maximizes profits by reducing the investment in solar panels.

FOUNDATION

Foundation on surface footing – 10 cubic yards (7.5 m3) – not requiring any excavation. It is necessary, however, to clear the terrain by removing the top layer of vegetation and levelling the ground.

INDEPENDENT CONTROL

Each MECASOLAR solar tracker integrates an independent PLC controller, working to monitor solar movements, in order to handle the prevailing weather conditions and perform remote operations.

MINIMAL CONSUPTION, NO WELDING ON SITE AND SIMPLY INSTALLATON.

The mecasolar motors consume less energy per year (100 kWh/year), resulting in minimal consumption. The entire tracker can be assembled with fastening devices, therefore on-site weldings are NOT required, reducing workforce cost and mounting time. The ergonomy of the design ensures minimum equipment and installation effort.

Tracker axis 2-AXIS: Horizontal and vertical
Maximum surface of Modules 990 square feet(92 m2)
Maximum Photovoltaic power 13,16kWp(depending on the efficiency of the modules)
zimuth drive By gearmotor and cogged crown wheel
Azimuth rotation angles Vertical axis: -120° to + 120°
Tilt drive Electrically driven mechanical jack
motorizes Tilt Adjustable from 0° to 60°
Tracker height at 60 22 feet (6.7 m) (from ground to top modules)
Motor consumption 100 kWh / tear
Motor operating voltage 380 V Three Phase
Structure Hot dipped galvanized steel structure
Structure design “V” Structure on cogged crown wheel
weight without modules,and without foundation 6,600 lb (3,000 kg)
Electrical cabiners and PLC Metal weatherproof, fully wired. IP66 Includes PLC
Electrical supply cabinet Metal, weather-tight, fully wired, IP55, includes AC surge protection and magnrtothermic (PLA) differential
Tracking technology independent Astronomical programming of PLC
Monitoring On-site, Ethernet, Intement (OPTIONAL)
Modules to be installed Any type of PV modules.
Optional module holder profile
Module maximum weight 2,750 Ib (1,250kg)
Wind protection system Programmable. Horizontal positioning at speeds over 43.5 mpt (70 km/h) (by gearmotor slipping)
Foundation Surface circular foundation, 10 cubic yards (7.5m3) wire mesh concrete. )ptional anchor bolts, direct bolt anchoring
Standard Compliant with EUROCODE 0
EUROCODE 1
EUROCODE 3
CE
Maintenance Annual revision of electrical and mechanical

2 AXIS TRACKER – ~425 Kb