Free of charge and accessible, both in English and Spanish- at www.proinso.net the goal of this new application is to carry out the calculation of photovoltaic solar energy production generated in kWh, based on the kWp of the installation and using both 1 and 2-axis trackers, anywhere in the world.
The company has made the following link available to the media, portals, blogs and other websites wanting to incorporate access to its application on the following link: http://www.proinso.net/_bin/irradiacion_inicio.php. It has also announced the launch next February of the iPhone and Android version incorporating new features and improvements.
Operation: 5 steps
1 .- The PV SOLAR TRACKER app. begins by providing the solar radiation data anywhere on the planet, measured in kWh/m2 (both daily and annually) on a horizontal plane at 0 degrees. Both a country and city can be selected, as can an exact location on the map anywhere in the world. The solar radiation data is based on various databases, both private and public, including the United Nations Organization.
2 .- Once the application has the radiation data on the horizontal plane (at 0 °), the user must enter values to calculate the overall performance or Performance Ratio (PR) of the installation. Thus, for this calculation, data on the following should be provided: estimated temperature losses, availability, wiring losses, estimated losses from dirt, losses due to being outside of MMP- the Maximum Power Point, inverter losses, shade losses, tolerance of the modules, losses due to angle mismatch and loss due to estimated spectral angle.
After entering this data, the application will provide a PR value for the facility. The overall performance of a total facility usually varies between 85% and 70% depending on the factors mentioned above.
3 .- Then, on the same screen select the tilt angle – in the case of the of 1-Axis Azimuth trackers- and proceed to the next screen to show the RESULT.
4 .- On the RESULT SCREEN the production data in the selected location can be found, with the PR and Availability shown, both on a 2-axis tracker facility , and a 1-axis tracker facility. (* On the same screen the tracker angle can be varied to a 1-Axis Azimuth to observe how the data changes). The data shown is the annually installed kWh / kWp. Thus, to calculate the production of 12 kWp from a tracker just multiply the value given by the SOLAR PV TRACKER application by 12.
5 .- Finally, we the QUALIFIED INSTALLERS network screen is reached where the SOLAR PV TRACKER application will indicate to the user where the PROINSO Network installers nearest to the location selected on the initial map of the facility can be found and the radius determined by the user in kilometres. Thus enabling the user to contact the nearest PROINSO Network installer with any technical or commercial queries they may have.